[China Glass Net] The automatic glass cutting machine is generally composed of a cutting table, a cutting bridge and a computer control box. The cutting table is composed of a bracket, a table top, a conveyor belt, a transmission device, and an air cushion device. The bracket is used to support the table top, and it is composed of a steel column, a steel beam and the like. The table top is made of laminate, with 3-6 transports arranged vertically above it, and the exposed tabletops outside the conveyor belt are covered with felt. There are many small holes in the table top, and the holes are connected with the air cushion bellows. The outer surface of the conveyor belt is usually slightly lower than the felt surface. When transporting the glass piece, lift it up by lifting the device so that its upper surface is slightly higher than the felt surface. The transmission equipment and lifting equipment of the conveyor belt are installed under the table top. The air cushion device is composed of a bellows, a duct, a fan, etc. . When cutting the glass piece, start the fan, open the air pipe shutter, use the fan to blow the air in the wind box, the air in the wind box overflows from the small hole in the table, form an air cushion, lift the glass piece, so as to adjust the position of the glass piece and Avoid scratching the glass surface, close the air duct shutter when cutting the glass, and the glass piece falls on the table. The cutting bridge of the automatic glass cutting machine, which is a metal structure bridge spanning the cutting table, which supports the metal rail on the longitudinal outer side of the cutting table. The guide rail on the side of the surface has a cutter wheel for cutting and cutting glass. The material of the cutter wheel is made of cemented carbide. It is mounted on a rotating shaft, which is mounted on the end of the cylinder rod of the cylinder. The shaft and the cylinder are equipped with The cutting starts. The computer control box, which is an operation cabinet that automatically controls the equipment. During operation, it is only necessary to input the data of the number, standard, shape and the like of the cut glass into the computer through the keyboard, and the cutting machine can complete the cutting operation according to the computer instruction.
Brand Name: Desay --can be customized
Pointed Toe Men's Boots Desay Group CO.,Ltd , https://www.desaygroup.com
Size Run: 39-45/7-13
Place of origin: WENZHOU ,ZHEJIANG,CHINA
Reference price: 19.99$
Supply ability: 6000-12000pairs per day
Minimum quantity: 800 pairs
Color: Black &Brown&Tan-- can be customized any colors
Season: For all seasons
Upper: Genuine leather, and easy to wear and take off.--can be customized any materials
Lining: Artificial leather ,Better stretch weave and black matte ,comfortable and does not rub your feet--can be customized any materials
Outsole materials: Rubber,the soles are resistant to slip and wear
Packing: Box and carton
Lead time: 45 day after receiving deposit